Mashimaro's Nitro OBD2 and EcoOBD2 ECU Chip Tuning Box Plug & Driver NitroOBD2 Eco OBD2 for Cars 15% Fuel Save and More Power & Torque (Yellow - Benzine Nitro)
Description
EcoOBD2 Chip Tuning Box
Green for Benzine Cars
Blue for Diesel Cars
Lower Fuel and Lower Emission
Up to 15% fuel savings
NitroOBD2 Chip Tuning Box
Yellow for Benzine
Red for Diesel
Up to 35% more power
Up to 25 % more torque
What is Chip Tuning Box?
NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.
When it plugged into OBD2 connector, Nitro/Eco OBD2 receives the information from the car computer ECU. With the received data from ECU, Nitro/Eco OBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure
EcoOBD2 to decrease the fuel consumption of your car.
NitroOBD2 to increase the performance of your car.
Installation and Calibration
1.Pull the Car Key out from the ignition.
2.Find OBD2 connector(*) in your car and Plug in Eco/Nitro OBD2
3.Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4.Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (Eco/Nitro OBD2 will communicate and establish connection with ECU)
5.Start up the engine.
6.Eco/Nitro OBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus Eco/Nitro OBD2 will adjust itself to match your car perfectly for more fuel saving.
Feature:
Plug Nitro/Eco OBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on.
Nitro/Eco OBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle,there might not be a need to make an additional adjustment. Nitro/Eco OBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving,and then Nitro/Eco OBD2 adjusts itself to match your car perfectly